During house cleaning, your laundry dryer vent isn’t a place you would quickly consider when thinking of it. However, there are numerous reasons to add dryer vent cleaning Vaughan to the top of your list. It is not only safe in that way but can also be of use to make sure that the laundry machines work properly.
It can be one or two periods of the day taking the opportunity to clean, but you will be safe from the fire outbreak in your home with a single or two dryer cleanings in a year. Dryers account for the largest incidences of home fires in households. But don’t worry, if you don’t know where to start in dryer vent cleaning Vaughan, it might look like a difficulty task, but we are here to assist you.
Where Is the Dryer Vent Located?
Seriously, not everybody is familiar with the dryer vent, so let’s start from here. Dryer vents shake your dirty clothes by blowing hot air over your cloths to remove the moisture. The fan then drives the hot to the outside. Despite the fact that there are a variety of different vents, fibers, and lint tend to get stuck in them. This coupled with hot air can easily ignite the lint if not detached and cleaned.
Usually, the dryer vents include the tube which is connected to the back of your machine, which is externally connected to the outside. Even so it is pretty effortless to clean as compared to other modern appliances. It will appear like a huge aluminum tube likely.
Cleaning the Air Dryer Vent
Generally, the process ought not be complicated. A slight pulling of the Dryer away from the walls may be required so that you can disconnect some components and get to the interior. Thus, there is a naturally-borne difference between electric and gas dryers. As far as it is concerned, you might want to seek professional help.
An electric dryer connects to a wall socket similarly to when you connect your charger to the wall socket, but it is a little larger. It may have four sectors as opposed to three. If you are in doubt, a gas-run dryer has a cord that fits into the normal three-hole outlet. But in houses, it is usual that you will have electricity instead of gas.
Here are directions to follow during dryer vent cleaning Vaughan:
Locate The Interior Vent
The first step is to try to find the dryer vent. At the rear side of your dryer, find the thin aluminum tube you connect to the wall through. Take your dryer out, disconnect it from the wall and unplug it. Always be careful to switch off and pull the electricity supply from the wall connection. Shut the valve off if it is gas.
Disconnect Your Vent
If you’re trying to cut the vent, you should try and get rid of any taping that ties the exhaust to the tube. It also seems to be aluminum foil tape.
It is important to avoid pulling the tube. In case you pull on it, you will probably rip the dryer vent. There should be no hesitation in getting it off.
Take out The Vacuum
If you pull the vent out, you can vacuum around the opening and maybe half an inch inside to pull the lint that may be loitering around the vent. Then we will start to work using the kit to deeply clean it and get rid of all the mess safely.
Use a Dryer Vent Cleaning Kit
Vaughan dryer vent cleaning kit is very easily purchased at Amazon stores or in the nearest home improvement stores. The price should be about between $ 25 and $ 35. You should be able to drill into the rods deep into the dryer vents, about twelve feet or more.
The dryer vent cleaning brush on the end of the rods will also be used in the drill to clean the vents.
Flying Debris
This method, you should ideally get the dirt to pop out and stare you right in the face, but using a broom and wide dustpan by your side, you will have no excuse but to clean this mess up! You would rather you get this up prior to going further since it leaves the way for it to get in the vent again.
